Click image to enlarge
1"-11-1/2 NPTF LEVL-SEAL Thread, 7/8" Taper Pressure Plug, Alloy Steel, PTFE Coated
Unbrako Part No. B796089
Specs
Item | Taper Pressure Plug |
System of Measurement | Inch |
Diameter | 1 |
Thread Pitch / TPI | 11.5 |
Thread Type | NPTF |
Taper Per Foot | 7/8" / LEVL-SEAL |
Material | Alloy Steel |
Finish | PTFE |
Hex Key Size | 5/8" |
Thread Direction | Right Hand |
Pack Type | Bulk |
Features
Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. The design of LEVL-SEAL plug permits seating within half a pitch in a normally tapped hole; compared to a full pitch with conventional plugs. Flush seating improves appearance and adds safety. Teflon coating acts as a lubricant and a seal. The coating reduces any tendency of the plug to "freeze" as a result of rust or corrosion.
- PTFE coating material provides a combination of extra hardness and abrasion resistance which permits reuse up to 5 times without appreciable loss of seal.
- Precision hex socket with maximum depth for positive wrenching at higher seating torques
- Flush seating is achieved through closer control of thread forms, sizes and taper-improves safety and appearance
- Controlled chamfer and the PTFE coating, which acts as a lubricant and seal, allow for faster installation.
Resource
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.